9 Search Results

Single-site copper-based catalysts have shown remarkable activity and selectivity for a variety of reactions. However, deactivation by sintering in high-temperature reducing environments remains a challenge and often limits their use due to irreversible structural changes to the catalyst. Here, we report zeolite-based copper catalysts in which copper oxide agglomerates formed after reaction can be repeatedly redispersed back to single sites using an oxidative treatment in air at 550 °C. Under different environments, single-site copper in Cu–Zn–Y/deAlBeta undergoes dynamic changes in structure and oxidation state that can be tuned to promote the formation of key active sites while minimizing deactivation throughmore » Cu sintering. For example, single-site Cu²⁺ reduces to Cu¹⁺ after catalyst pretreatment (270 °C, 101 kPa H₂) and further to Cu0 nanoparticles under reaction conditions (270–350 °C, 7 kPa EtOH, 94 kPa H₂) or accelerated aging (400–450 °C, 101 kPa H₂). After regeneration at 550 °C in air, agglomerated CuO was dispersed back to single sites in the presence and absence of Zn and Y, which was verified by imaging, in situ spectroscopy, and catalytic rate measurements. Ab initio molecular dynamics simulations show that solvation of CuO monomers by water facilitates their transport through the zeolite pore, and condensation of the CuO monomer with a fully protonated silanol nest entraps copper and reforms the single-site structure. Importantly, the capability of silanol nests to trap and stabilize copper single sites under oxidizing conditions could extend the use of single-site copper catalysts to a wider variety of reactions and allows for a simple regeneration strategy for copper single-site catalysts.« less

Understanding the adsorption and reactivity of carboxylic acids on oxide surfaces is of great interest in catalysis for biomass upgrading via ketonization, a carbon–carbon coupling reaction. Herein, we investigate the adsorption and reaction of acetic acid on anatase TiO₂(101) using scanning tunneling microscopy, infrared spectroscopy, temperature programmed reaction, and density functional theory calculations. We demonstrate the adsorption of acetic acid can form two intermediates: (1) dissociated, bidentate acetate with an associated bridging hydroxyl, and (2) molecular, monodentate acetic acid. The coexistence of ordered phases with increasing monolayer (ML) saturation coverages consisting of (1) pure acetate (0.5 ML), (2) mixed acetate/aceticmore » acid (0.67 ML), (3) mixed acetate/acetic acid (1.0 ML) and (4) pure acetic acid demonstrates similar energetics for both acetate and acetic acid species. Under ultra-high vacuum conditions, the presence of both monodentate acetic acid and bidentate acetate was observed below room temperature, while solely bidentate acetate was observed up to 575 K. The deprotonation of acetic acid produces water at 280 K, while the thermal decomposition of bidentate acetate produces ketene and acetic acid at 645 K. In conclusion, this model study provides detailed insight into the stability and reactivity of carboxylic acid surface-bound intermediates, which could participate during ketonization reactions for biomass upgrading.« less

The dynamics of reactive intermediates are important in catalysis for understanding transient species, which can drive reactivity and the transport of species to reaction centers. In particular, the interplay between surface-bound carboxylic acids and carboxylates is important for numerous chemical transformations, including CO₂ hydrogenation and ketonization. Here, we investigate the dynamics of acetic acid on anatase TiO₂(101) using scanning tunneling microscopy experiments and density functional theory calculations. We demonstrate the concomitant diffusion of bidentate acetate and a bridging hydroxyl and provide evidence for the transient formation of molecular monodentate acetic acid. The diffusion rate is strongly dependent on the positionmore » of hydroxyl and adjacent acetate(s). A facile three-step diffusion process is proposed consisting of acetate and hydroxyl recombination, acetic acid rotation, and acetic acid dissociation. Here this study clearly demonstrates that the dynamics of bidentate acetate could be important in forming monodentate species, which are proposed to drive selective ketonization.« less

Boron-based catalysts have been shown to be both active and selective for driving the oxidative dehydrogenation of propane (ODHP) without the use of precious metals. This reaction occurs at temperatures that melt the oxide catalyst which challenges our ability to identify the liquid structures of the boron oxide phase under reaction conditions, hindering the understanding of its active sites and reaction mechanism. By combining ab initio molecular dynamics simulation, in-situ Raman characterization, and microkinetic modeling, we propose that the di-coordinated boron sites (BO2) in liquid boron oxide are the active species for O2 activation under reaction conditions. The formed peroxy-likemore » species (>B-O-O-B<) can be viewed as a moderate oxidant for ODHP. The dynamical >B-O* dangling bond originated from >B-O-O-B< site as well as the liquid B2O3 structure itself, plays a critical role in the abstraction of H atoms from propane (C3H7 radical formation). Microkinetic modeling reveals C3H7 radical formation to be the main rate controlling step (~75% degree of rate control) with the dehydration of boron hydroxyls (B-OHs) to recover the di-coordinated boron active sites controlling the remainder of the rate (~25% degree of rate control). Moreover, the activation barriers are found to strongly depend upon the surface B-OH concentration. These findings provide significant insights into the active site and reaction mechanisms on boron-based catalysts for ODHP and underlie the importance of understanding the liquid nature of the catalyst to account for the catalytic activity.« less

With airlines committed to drastically reduce their carbon footprint by 2050, producing jet fuel from renewable ethanol is of particular interest. Here we reported on an Ag/ZrO₂/SBA-16 catalyst that is very effective for directly converting ethanol into to n-butene-rich olefins jet fuel precursors (i.e., 88% at full conversion). Here, we report on a Cu/ZrO₂/SBA-16 catalyst that presents remarkable olefins selectivity (i.e., 89% at 96% conversion) and enhanced stability as compared to Ag/ZrO2/SBA-16 catalyst. Under severe operating conditions a conversion loss < 10% was observed with the Cu/ZrO₂/SBA-16 catalyst as compared to a 50% loss of conversion with the Ag/ZrO₂/SBA-16 catalyst.more » Combined experimental and computational tools revealed that replacing Ag with Cu shifts the reaction pathway of crotonaldehyde hydrogenation from 1,3-butadiene (i.e., coke precursor) production to butyraldehyde formation. Experiments conducted with 4%Cu/4%ZrO₂ supported on SBA-16, dealuminated zeolite Beta, and aluminum silicate revealed the performance and stability advantage of the SBA-16-supported catalyst.« less

Requiring catalysts to be both active yet stable over long periods of time under variable reaction conditions including high and low temperatures is a daunting challenge due to the almost mutual exclusivity of these constraints. Using CO oxidation as a probe reaction, in this work we demonstrate that thermally stable single atom copper catalysts prepared by high temperature synthesis (atom trapping) on ceria can achieve this feat by allowing modulation of the Cu charge state through facile charge transfer between active site and support. This provides the catalysts with an ability to activate either lattice or adatom oxygen atoms, accessingmore » additional reaction channels depending on the reaction conditions. Such adaptability allows dynamic response of catalysts enabling them to remain active under variable reaction conditions. The inherent stability of the catalyst arises from the enhanced strength of the Cu-O interactions from high temperature synthesis that exist even when Cu oxidation state varies, which retards sintering and deactivation. As we show here, one can circumvent the dilemma of designing catalysts that are simultaneously active and stable by matching the redox properties of the active site and support and establishing an environmental adaptability around the active sites.« less

Ab initio molecular dynamics simulations combined with enhanced sampling techniques are becoming widespread methods to investigate chemical phenomena in catalytic systems. These techniques automatically include finite temperature effects, anharmonicity, and collective dynamics in their robust description of enthalpic and entropic contributions, which can have significant impact on reaction free energy landscapes. This contrasts with standard ab initio static approaches that are based on assessing reaction free energies from various coarse-grained descriptions of the reaction potential energy surface. Enhanced sampling ab initio molecular dynamics opens the way to first principles simulations of systems of increasing complexity like solid/liquid catalytic interfaces. Here,more » we aim at guiding the reader through the basis of these techniques, summarizing their fundamental theoretical and practical aspects, and reviewing the relevant literature in the field. After a brief introduction to the problem, we will illustrate the advantage of using molecular simulations to include finite temperature effects, examine the most common ab initio techniques currently in use, describe their application to solid state heterogeneous catalysts, and finally critically review the most popular enhanced sampling techniques used in computational catalysis.« less

In catalysis, MgO is often used to modify the acid-base properties of support oxides and to stabilize supported metal atoms and particles on oxides. In this study, we show how the sublimation of MgO powder can be used to deposit MgO monomers, hither on anatase TiO₂(101). A combination of X-ray electron spectroscopy, high-resolution scanning tunneling microscopy, and density functional theory is employed to gain insight into the MgO monomer binding, electronic and vibrational properties, and thermal stability. In the most stable configuration, the Mg and O of the MgO monomer bind to two surface oxygens and one undercoordinated surface titanium,more » respectively. The additional binding weakens the Mg-O monomer bond and makes the Mg more ionic. The monomers are thermally stable up to 650 K, where the onset of diffusion into the TiO₂ bulk is observed. Finally, the monomeric MgO species on TiO₂(101) represent an ideal, atomically precise system with modified acid-base properties and will be employed in our future catalytic studies.« less

Supported single-atom catalysts (SACs) have gained increasing attention for improved catalytic activity and selectivity for industrially-relevant reactions. In this study, we explore the hydrogenation of acetylene over single Pt, Ru, Rh, Pd, and Ir atoms supported on the Fe₃O₄(001) surface using density functional theory (DFT) calculations. The thermodynamic profile of H diffusion is significantly changed with the type of single metal atoms used and suggests that H spillover from the single atom dopant to the Fe₃O₄(001) surface is favored and will likely lead to high H coverages in the functioning catalyst. Correspondingly, as the surface H coverage increases, the importantmore » desorption step of ethylene becomes energetically competitive against the detrimental hydrogenation steps of ethylene to ethane. Overall, we show herein that the selectivity of SACs towards ethylene production can be tuned by considering the proper type of metal and controlling the redox state of the support.« less